Environmental Benefits

• Green by Design: Renewable, Durable, Sustainable Wood
• Addressing Negative Perceptions and Campaigns
• Build with Wood and Help Protect the Environment
• Selecting Environmentally Friendly Flooring
• Build that New Fence with Wood and Help Protect the Environment

Green by Design: Renewable, Durable, Sustainable Wood

The ATHENA™ Sustainable Materials Institute’s ultimate goal is to encourage the selection of material mixes that will minimize the environmental impact of a building over its life-cycle. The ATHENA computer model was used to compare alternative wood, steel and concrete structural designs for a three-story office building. The ATHENA findings are the result of a five-year research program involving architects, environmentalists, economists, engineers, and representatives from the steel, concrete and wood industries. ATHENA™’s life-cycle research found that wood building products have the lowest environmental impact when compared to other major building materials, based on raw materials and energy use, emissions to air, water and land.

What are the facts?

• Total energy use: The wood building used the least energy. The concrete option required 1.7 times the energy for wood. The steel option required 2.4 times the energy. Wood simply does not require much energy to manufacture.
• Greenhouse gases: The wood building had the lowest greenhouse gas emissions. The steel building generated 1.45 times and the concrete building generated 1.81 times the greenhouse gases for wood.
• Air pollution: The wood design had the lowest air pollution index. The steel building produced 1.42 times and the concrete building produced 1.67 times the air pollution index.
• Solid waste: The wood design had the lowest solid waste. This takes into account both manufacturing and on-site construction waste. Steel produced 1.36 times and the concrete produced 1.96 times the solid waste. This means there is virtually no waste during the manufacturing process and the use of engineered wood products has radically reduced the on-site construction waste.
• Ecological Resource Use: The wood design had the lowest ecological resource use index. Steel was 1.16 times and concrete was 1.97 times the index for wood. This factor compares the long-term effects of resource extraction. Although forestry affects a large area, reforestation means the effects are short term. Sustainable forest management practices help ensure that disruption is minimized.
• Conclusion: The office building built with wood had lower environmental impact for energy use, greenhouse gases, air and water pollution and ecological resource extraction than the steel or concrete building. A similar case study of residential buildings (comparing wood, steel and concrete construction) produced similar findings in terms of wood’s superior environmental performance.

These facts and others based on the ATHENA life-cycle findings can be found in a new primer put out by the Canadian Wood Council & the Forest Products Association of Canada have put out a primer, “Green by Design”.

“Green By Design: Renewable, Durable, Sustainable Wood.” Canadian Wood Council & Forest Products Association of Canada. (CWC & FPAC)

A primer on the environmental comparisons of wood and other materials in home and building construction.

This brochure explains why asking for Canadian wood products is the best environmental choice. It shows how taking a life cycle approach to building design will result in wood being the winner over competing products such as steel and concrete.

Addressing Negative Perceptions and Campaigns

According to the Wood Promotion Network, the last five years have witnessed mounting efforts by competing industries and environmental groups to reduce the market for wood. Their recent studies show that between 1997 and 2000 lumber alone lost 2.5% of the residential market for floors, walls and roofs. Significant environmental campaigns have been aimed at putting pressure on major corporate buyers of wood products. As a result, the public has been led to believe that forest are diminishing, that industry practices are not sustainable, and that the world needs to use less rather than more wood.

The Wood Promotion Network is N. America’s largest ever coalition of wood product and allied industry companies and related associations, representing more than two-thirds of N. American wood production. These companies have joined together to educate builders, DIYers and homeowners throughout North America on the benefits of wood building materials and the abundance of today’s North American forests.

Thus, the WPN goals are to secure and expand wood markets in N. America and to increase confidence about forest abundance and sustainability. While the goals may seem ambitious, the hard facts show that wood is the best environmental choice, hence it is not surprising that their campaigns to date have resulted in major achievements in terms of improving building and consumer perceptions of wood.

What are some of the messages that the Wood Promotion Network gets across:

• N.America’s forests are abundant and growing, based on satellite imagery.
• Wood is the best insulator against heat and cold, which makes it the most energy efficient material that can help keep home energy bills in check.
• Regardless of market volatility, wood is the most affordable building material you can use. Framing an average 3-bedroom home can cost up to 30% less with wood versus other framing materials.
• New innovations in engineered wood products and pre-made panels and trusses help builders and homeowners keep framing costs down. (WPN AR2001).
• The production and use of wood is easier on the environment than any other building material. It takes less non-renewable fossil fuels and less energy to produce wood framing materials than alternative framing materials. (WPN AR2001).
• Wood is the world’s only 100% renewable building material and is manufactured with the organic power of solar energy. (WPN AR2001).
• Wood is the only major building material that is renewable. Canada’s sustainably managed forests ensure that there is an ample supply. New manufacturing technology allows every part of the tree to be used so that nothing is wasted. Advanced engineered wood products make use of fast growing species to produce high strength products without requiring large dimension timbers to meet building needs. (WPN AR2001).

Build with Wood and Help Protect the Environment

Over 80% of Canadians believe that sustaining the environment is a major priority. Many of us do our part, by recycling newspapers, refusing or reusing shopping bags, and composting waste.

But we may not realize that we make a much bigger impact on the environment through our choice of building materials.

Due to sustainable forestry practices, the volume of wood in Canada’s productive forests increased by 35% between 1976 to 1991. Last year alone, over 700 million seedlings were planted. That’s about 25 trees planted for each Canadian.

But how do we replace the thousands of tons of ore that went into steel beams or aluminum siding, or the millions of litres of petroleum that went into making plastic components?

The answer is – we can’t. Those resources are finite. Once we consume them, they are gone forever.

A study by the Canadian Research Alliance examined the relative environmental impacts of various building materials. The results clearly demonstrate not only that wood is a renewable resource, but also that the manufacture of wood products is cleaner, less wasteful, and consumes less energy than the alternatives.

Life-cycle analysis shows that a steel wall requires 3 to 6 times more energy to extract, manufacture and construct than a wood wall. The steel wall also uses 25 times more water in its manufacture, and releases 3 to 6 times more carbon dioxide emissions.

The manufacture of concrete produces 2 to 3 times more carbon dioxide than wood, and results in 5 times more solid waste.

The production of aluminum generates 8 times more polluting emissions in the air and 300 times more in the water, than the manufacture of wood. The manufacture of aluminum siding requires 5 times more energy than wood.

Construction is a $25 billion a year industry in Canada. That’s the equivalent of almost $900 for each Canadian, much of it spent on building materials.

Source: http://www.cwc.ca/environment/green_facts/

Selecting Environmentally Friendly Flooring

Thinking of replacing that worn flooring in the front hallway?

By shopping around, you can get information about the price, style, and maintenance of commonly-used flooring products.

It is much harder to learn about the hidden impact of these products on the environment. To make an informed choice, consumers also want to know about the composition and manufacture of various flooring materials.

Synthetic sheet flooring, such as cushion flooring, is made from non-renewable petroleum resources. Because it is non-biodegradable, scraps cannot be recycled. The manufacturing process is energy-intensive, depleting the supply of fossil fuels.

Ceramic tiles are made by firing clay, a plentiful resource. However, the kilns used to fire the clay consume large quantities of energy. Ceramic tiles are not recyclable.

Linoleum is made with renewable ingredients (linseed oil, cork, wood dust and dyes) that have been heat-cured and sealed, but it is not recyclable. Various chemicals are used for manufacturing, although less than are required for synthetic floor materials.

So what can you select that is environmentally friendly as well as being durable, easy-to-care-for, beautiful and affordable?

The answer is wood. Oak and maple hardwood flooring – solid plank, pre-finished wood flooring systems, parquet tiles and veneer – comes from wood, a renewable resource. Part of the energy used in the manufacturing process comes from wood waste materials.

Veneer flooring is comprised of a surface of high quality hardwood laminated to a plywood or particle board backing, and packaged as tiles. Wood fibre waste from low grade wood is used in the backing, and high-grade wood is used in the surface veneer.

When you’re shopping around, ask your retailer or contractor for more information from the flooring manufacturer. That way you can select a product that is attractive to the environment AND to your home.

Source: http://www.cwc.ca/environment/green_facts/

Build that New Fence with Wood and Help Protect the Environment

When you shop for materials to build your new fence or deck, you probably think about things like appearance, ease of installation, and cost. But what about the cost to the environment of the building materials that we buy?

Over 80% of Canadians believe that sustaining the environment is a major priority. Many of us do our part by recycling newspapers, adding extra insulation in our homes, and walking to the video store at the corner instead of driving. But we also make a major impact on the environment when we choose building materials, often without realizing it.

Wood is a popular and attractive choice for many outdoor landscaping projects. Due to sustainable forestry practices, the volume of wood in Canada’s productive forests increased by 35% over the last 20 years. Last year alone, about 700 million seedlings were planted. That’s over 20 trees planted for each Canadian.

But what about that chain-link fence, those concrete patios stones or that vinyl lounge chair? How do we replace the thousands of tons of ore that went into the manufacture of steel, or the millions of litres of petroleum that went into making plastic components?

The answer is – we can’t. Those resources are finite. Once we consume them, they are gone forever. And the manufacturing process has added to the world’s pollution problems.

A study by the Canadian Research Alliance examined the relative environmental impacts of various building materials. The results clearly demonstrate that the manufacture of wood products is cleaner, less wasteful, and consumes less energy than the alternatives.

Life-cycle analysis shows that a steel wall requires 3 to 6 times more energy to extract, manufacture and construct than a wood wall. The steel wall also uses 25 times more water in its manufacture, and releases 3 to 6 times more carbon dioxide emissions.

The manufacture of concrete produces 2 to 3 times more carbon dioxide than wood, and results in 5 times more solid waste.

The production of aluminum generates 8 times more polluting emissions in the air and 300 times more in the water, than the manufacture of lumber. The manufacture of aluminum siding requires 5 times more energy than lumber.

So when you go to buy the materials for that new fence or deck, consider the alternatives – and make an informed choice.

Source: http://www.cwc.ca/environment/green_facts/
Click here for more green facts on trusses, building basements, whole buildings and more!

Size
About half of Canada’s land mass is covered by forest, that is approximately 417 million hectares. Only ¼ of Canada’s forests are dedicated to forest management (119 million hectares), the remainder, for example, is either protected from harvesting, is of a non-commercial quality, or is commercial but not yet accessed or allocated.

Ownership
94% percent of Canada’s forests are publicly owned, while the remaining 6% is private property belonging to more than 425,000 landowners.

Harvest Levels
Canada harvests less than ½ of 1% of its commercial forest area each year, or ¼ of 1% of its total forest area. Moreover, it grows twice as much timber as it harvests. About ½ of the Canadian forest will NEVER be harvested. That never-to-be-logged Canadian forest is larger than California, Arizona, New Mexico, Texas and Louisiana combined.

Fire, Insects & Disease
Did you know that Canada harvests less of its commercial forest each year (0.4%) than is taken by fire, insects and disease (0.5%).

Regeneration
By law all forests harvested on Canada’s public lands must be replaced. . More than half of the area harvested in Canada is left to regenerate naturally. Many tree species can reestablish themselves on a site without planting or seeding. These natural mechanisms include seeding from the adjacent forest, suckering of stumps and roots, and growth of young trees remaining on the harvested area. In summary, regeneration is accomplished by natural regeneration (53%), planting (43%), and aerial seeding (4%).
An Abundant and Growing Forest
The area of trees growing in Canada is growing not shrinking. In fact, during the 5 year period, 1990-1995, the United Nations FAO estimated a net increase of 4% in the area of trees growing in Canada’s commercial forests.
Helping Our Climate
Trees are living plants that ‘breathe’ to help them grow. As they breathe, they remove unwanted carbon dioxide from the air – a greenhouse gas that contributes to global warming – and replace it with life sustaining oxygen.
Park System
Canada is the world leader in terms of area dedicated to its national and provincial park system for the use and enjoyment of Canadians and citizens around the world. Its national and provincial parks alone occupy some 56.8 million hectares. Compare that to the area of forests managed primarily for wood production in Canada – 119 million hectares – and one can quickly see that Canada’s forests are maintained for a variety of values and uses.
Original Forest Cover
Almost half of the Earth’s original forest cover is gone, much of it destroyed within the past three decades. In contrast, Canada has maintained over 90% of its forest cover and it has done so while being one of the world’s largest producers of high-quality forest products.
Forest Certification
Certification provides proof that forests are being managed by an independent 3rd party audit. Currently, if including CSA, SFI, FSC and ISO 14001 certifications, Canada has certifications covering some 115 million hectares of forest land- the largest certified forest area in the world! If however, one considers only those certifications to forestry-specific standards such as CSA, SFI, FSC, Canada has over 25 million hectares of forest land certified – of which 1 million is certified to FSC (see next bullet). However, the area of certifications to forestry-specific standards (CSA, SFI, FSC) is scheduled to grow considerably by 2006 given a new commitment by the Board of FPAC. It is also important to remember that the vast majority of wood coming from Canada’s forests are well-managed, certified or not. For more information on the forestry specific standards noted above or on forest management certification status in Canada, visit www.CertificationCanada.org.

FSC Forest Certification
Forest Stewardship Council (FSC) certification is not practical for small 10-100 acre parcels of land which are the primary source of high value hardwood in Canada. Costs to implement and maintain an FSC certification would be higher than the value of product derived. To be brief, FSC on small private lands managed for timber is conceptually unworkable in Canada. This point is made given that many environmental organizations lobby purchasers of Canadian forest products to specify FSC certified wood – this is an unrealistic demand for most small private woodlots in Canada. It should also be noted that even large scale commercial forestry operations in Canada for the most part are not pursuing FSC certifications for a variety of reasons. To date, 1 million of 25 million hectares of certified forest land in Canada is certified to the FSC Principles.

Key Facts on Sustainable Forest Products in Canada

What are the ATHENA™ Sustainable Materials Institute’s Life Cycle Facts in Support of Wood over Competing Products?

Total energy use: The wood building used the least energy. The concrete option required 1.7 times the energy for wood. The steel option required 2.4 times the energy. Wood simply does not require much energy to manufacture.

Greenhouse gases: The wood building had the lowest greenhouse gas emissions. The steel building generated 1.45 times and the concrete building generated 1.81 times the greenhouse gases for wood.

Air pollution: The wood design had the lowest air pollution index. The steel building produced 1.42 times and the concrete building produced 1.67 times the air pollution index.

Solid waste: The wood design had the lowest solid waste. This takes into account both manufacturing and on-site construction waste. Steel produced 1.36 times and the concrete produced 1.96 times the solid waste. This means there is virtually no waste during the manufacturing process and the use of engineered wood products has radically reduced the on-site construction waste.

Ecological Resource Use: The wood design had the lowest ecological resource use index. Steel was 1.16 times and concrete was 1.97 times the index for wood. This factor compares the long-term effects of resource extraction. Although forestry affects a large area, reforestation means the effects are short term. Sustainable forest management practices help ensure that disruption is minimized.

Conclusion: The office building built with wood had lower environmental impact for energy use, greenhouse gases, air and water pollution and ecological resource extraction than the steel or concrete building. A similar case study of residential buildings (comparing wood, steel and concrete construction) produced similar findings in terms of wood’s superior environmental performance.

What are some of the key sustainable wood product messages that the Wood Promotion Network?

N. America’s forests are abundant and growing, based on satellite imagery.

Wood is the best insulator against heat and cold, which makes it the most energy efficient material that can help keep home energy bills in check.

Regardless of market volatility, wood is the most affordable building material you can use. Framing an average 3-bedroom home can cost up to 30% less with wood versus other framing materials.

New innovations in engineered wood products and pre-made panels and trusses help builders and homeowners keep framing costs down.

The production and use of wood is easier on the environment than any other building material. It takes less non-renewable fossil fuels and less energy to produce wood framing materials than alternative framing materials.

Wood is the world’s only 100% renewable building material and is manufactured with the organic power of solar energy.

Wood is the only major building material that is renewable. Canada’s sustainably managed forests ensure that there is an ample supply. New manufacturing technology allows every part of the tree to be used so that nothing is wasted. Advanced engineered wood products make use of fast growing species to produce high strength products without requiring large dimension timbers to meet building needs.

Garden Grades  

The garden grades, Deck Heart,
Construction Heart, Deck Common, Construction Common, Merchantable Heart and Merchantable, are offered seasoned or unseasoned. They are frequently specified for decks, fences and garden structures where knots or other characteristics have little or no effect.
       

All Heartwood
     

Construction Heart/Deck Heart
A heartwood grade containing knots of varying sizes and other slight imperfections. Available seasoned or unseasoned. This highly useful grade can be ordered surfaced or rough. Deck Heart has similar appearance and uses as Construction Heart but is also graded for strength. Deck Heart is available in 2×4 and 2×6 only.

Uses Decks, posts, retaining walls, fences, garden structures, stairs or other outdoor uses in contact with the ground.
               

Merchantable Heart
This economical heartwood grade allows slightly larger knots than construction grades; holes limited to size of knots. Allows checks, some splits and some manufacturing flaws. Available unseasoned, surfaced or rough.

Uses Fences, retaining walls, garden structures or other outdoor uses in contact with the ground.
       
Heartwood and Sapwood
   
 

Construction Common/Deck Common
Same general characteristics as Construction Heart, but contains combination of heartwood and sapwood. Unseasoned or seasoned, it can be surfaced or rough. Deck Common is also graded for strength and is available in 2×4 and 2×6 only.

Uses Decking, fence boards and other above-ground garden uses that do not require heartwood’s insect and decay resistance.
               

Merchantable
Has same characteristics as Merchantable Heart but contains sapwood in varying amounts. This economical grade is available unseasoned and can be ordered surfaced or rough.

Uses Fence boards, rails and other above-ground outdoor and garden uses. Also subflooring and temporary construction.

Architectural Grades  

The architectural grades, Clear All Heart, Clear, Heart Clear, Heart B and B Grade, are normally sold kiln dried (preshrunk and stress free) for the finest exterior and interior architectural uses. No other wood equals these finish grades in beauty and dimensional stability. They are the choice grades for siding, paneling, trim and cabinetry where attractiveness and tight joinery are desired.
       
All Heartwood
     

Clear All Heart
Finest architectural heartwood grade, normally Certified Kiln Dried (also available unseasoned), well manufactured, free of defects one face (reverse) face may have slight imperfections). Available surfaced or saw-textured.

Uses Siding, paneling, trim, cabinetry, molding, fascia, soffits, millwork. Also fine decks, hot tubs, garden structures, industrial storage and processing tanks.

Heart B
Quality heartwood grade containing limited knots and other characteristics not permitted in Clear All Heart and Heart Clear. Available kiln dried or unseasoned. This grade can be surfaced or saw-textured.

Uses Siding, paneling, trim, fascia, molding and other architectural uses. Quality decking, garden shelters and other outdoor uses in contact with the ground.

Heartwood and Sapwood
     

Clear
Same general quality as Clear All Heart
except contains sapwood in varying
amounts. Some imperfections not
permitted in Clear All Heart. Normally
Certified Kiln Dried (also available
unseasoned). Available surfaced or
saw-textured.

Uses Siding, paneling, trim, cabinetry,
molding, fascia, soffits. Also quality
decking, garden shelters and other
above-ground applications.

B Grade
Quality grade containing sapwood, limited knots and other characteristics not permitted in Clear. Certified Kiln Dried; also unseasoned. Available surfaced or saw-textured.

Uses Siding, paneling, trim, fascia, molding and other architectural uses; quality decking, garden shelters and other above-ground outdoor applications.

Surface Textures
Saw Textured The saw textured surface, obtained during the milling process which uses either circular or band saws, is present on all four sides.

Rougher Headed The lumber receives its texture from a milling process which uses roughened planer knives. The rough texture is clearly visible on all four sides.

Surfaced Four Sides (S4S) The smooth surface on all four sides presents a uniformly sized product with a high quality appearance. Sizes from 2×4 (51mm x 102mm) up to 6×6 in. (152mm x 152mm) are generally available. Larger sizes are produced on special orders.

Grade	Description
No. 2 and Better Clear
	This grade should be specified when the finest quality rough lumber is desired. The lumber is sound and well manufactured. Its natural characteristics do not detract from the woods fine appearance. Grading Rule Paragraph Export R List 401
D and Better Clear
	This grade consists of D Clear, C Clear, and B Clear. The C and Better Clear grade offers good appearance in high quality, well manufactured lumber. Suitable for high quality landscape structures and as exposed posts and beams in heavy timber construction. WRCEA members produce this grade without cut-outs. In most cases, this grade is sold with a specified allowance of D grade. D Clear grade permits larger and more numerous natural characteristics which are widely accepted in the construction of outdoor structures. Some pieces of D Clear may require trimming to yield clear lengths for the intended use. Available surfaced or rough textured.
Appearance Knotty
	A non structural product manufactured to meet the appearance requirements of quality projects. This material has highly restricted wane allowances to give well defined corners. Contains no holes or other characteristics. Represents good value for appearance end uses. Available rough sawn or rougher headed in nominal 2″ (51mm) and thicker sizes. Note: Upon request, Appearance Knotty timbers are available with structural grading. Be certain to specify Appearance Knotty structural lumber when strength characteristics are required. Grading Rule Paragraph Proprietary
No. 2 and Better Structural
	Material of this grade is evaluated for structural strength characteristics. The classification includes pieces meeting the grades of Select Structural, No. 1 Structural, and No. 2 Structural. Lumber of this grade is intended for engineered applications where strength is more important than appearance. Available surfaced or rough textured.

Dimensional Stability
Western Red Cedar wood has excellent dimensional stability because of its low wood density and low shrinkage factor. A major contributor to this stability is the fact that its moisture content at the fibre saturation point is 18 to 23%, compared to 25 to 30% in most Canadian softwoods. As a result, Western Red Cedar shrinks and swells minimally, displaying only small movements with changes in humidity. Lower absorption of water is a result of the high extractive content blocking absorption sites. This property contributes to Western Red Cedar’s suitability for use in paneling, mouldings and a number of other applications such as saunas where dimensional stability and water repellency is important.

Thermal and Insulating Properties
Western Red Cedar has good insulation value because of its low wood density and coarse texture. It is the best insulator among the most common available softwood species and is far superior to brick, concrete and steel. This property ensures that homes built with Western Red Cedar will be cooler in the heat of summer and warmer in winter as opposed to homes using denser species or man-made products. Western Red Cedar’s ability to dampen vibrations is an important acoustical property which makes it particularly effective as paneling and moulding where it is desirable to reduce or confine ne noise.

Flame Spreading Rate
The flame-spread rating of Western Red Cedar is 67 to 73 (Class II rating) and the smoke developed classification is 98. Both of these are used to regulate the use of materials where potential to generate smoke or smoke control movement is important. Due to its low flame-spread rating, it will perform better than most dense softwoods which have flame-spread ratings around 100. Western Red Cedar has a flame spreading rate and a smoke-developed classification that are considerably below the maximum limits set by most building codes.

Finishing and Workability
The lack of pitch or resinous extractives that are soluble in paint vehicles contributes to Cedar’s good finishing properties. Cedar takes a variety of coatings, paints and stains exceptionally well, particularly when dried and properly primed. Western Red Cedar is among the easiest timbers to work with because of its straight grain and uniform texture. It planes and sands cleanly and, because of its low wood density, requires little energy to saw or otherwise work. Cedar also glues well with a wide range of adhesives and gluing conditions.   ]]> http://www.lumberoutwest.com/uncategorized/475/western-red-cedar-for-indoor-use/feed/ 0 http://www.lumberoutwest.com/uncategorized/461/cedar-siding-treatment/ http://www.lumberoutwest.com/uncategorized/461/cedar-siding-treatment/#comments Mon, 30 Mar 2009 18:35:51 +0000 admin http://www.lumberoutwest.com/?p=461 Q: What do you recommend for treatment of cedar siding?

— Mary, Kansas City, Missouri

A: Tom says: Cedar wood does contain a lot of tannic acids, especially red cedar, but in general, cedar doesn’t have to be treated that differently than other woods. But really I need to know whether you want to leave the cedar clear. If so, there are several excellent products out there for cedar siding and decks, which you should be able to find out about by consulting a professional at your local hardware store. One thing to remember is that you’ve got to make sure your cedar is clean and dry when you apply these finishes. On the other hand, if you want to paint the cedar siding, it’s got to first be primed, cleaned and prepped. As I said, the preparation is the most important step in any kind of painting you do: the surface has to be clean and dry. And depending on your situation, if you can get the cedar and let it weather a little bit, a lot of the tannic acids will come out, so it’ll be easier to paint. If not, and you painted it white for instance, sometimes the tannic acids will bleed through the white and that can be difficult to hide. A good primer followed by a latex top coat, or just a solid-body paint, or else a stain would be your best bets, being sure to follow the manufacturer’s recommendation on all.